The Linksys Velop device consist more than two networking devices in the content box. We will provide step by step setup guidance to establish the Linksys Velop network in your home. You will get to know, how to connect Velop router node to modem, connect child node to router node, configuring Velop settings, and solutions to technical issues.
Connect Velop Nodes First
To start the Linksys Velop
setup, you have to connect it to the home cable modem with the help of the
Ethernet cable.
1.
You must use the cable which should be in good
condition.
2.
Now, start by connecting one end to the Velop router
node WAN or internet port.
3.
Then, connect the other end of the cable to the
cable modem LAN port.
4.
Power the Linksys router node on by connecting
its power adapter to the power socket.
Connect Other Nodes
If you have anymore Velop child nodes, then you can connect
them with router node. Let’s see how to link them;
1.
Place the child nodes on your desired locations
and power them on.
2.
Simply, press the Sync/WPS button on the router
node and child nodes.
3.
The nodes will connect with each other automatically
within 5-10 minutes.
Now, it is time to adjust the Linksys Velop device settings
via your phone or computer.
Adjust Velop Settings
There are two methods that you can easily access the
interface and adjust the Linksys Velop settings.
If you want to adjust settings from Linksys Velop WiFi interface
via computer;
1.
You have to connect the computer or laptop to
the router via SSID or LAN cable.
2.
Just open the update web browser and here you
have to enter the linksyssmartwifi.com or IP address 192.168.1.1 in address
bar.
3.
Press the Enter button and you will get to the linksyssmartwifi login page. To Log In, you have to enter
the username and password.
Now, you can Log In and adjust the settings, and complete the
Linksys setup.
If you want to adjust settings via phone;
1.
You have to install the Linksys app in your
internet device.
2.
You will find the app in the android Play Store
or iPhone App Store.
3.
Here, just download the Linksys app and open it.
4.
You will reach to the app login page, where you
can log in by entering the Email ID and password.
Velop Tech Solutions
Use Good Condition Cables
The Linksys device connected to the modem with the help of
the Ethernet cable. It should be in good condition (not damaged). If it is
damaged then replacing is the best option.
Connect Devices At Optimal Locations
You must provide your Linksys devices power at optimal
locations in your house. The Optimal location means far away from the
electronic devices like microphones, microwave ovens or cordless phones.
Reboot Linksys Device
You can restart the Linksys Velop mesh device by using two
different methods;
1.
Disconnect the power of Linksys device and
reconnect with it.
2.
Find and press the power button twice.
Reset If Any Big Issue Comes
To reset the device, you have to find the Linksys Velop RESET
button and long press with the help of a pin or sharp object. By doing so, you
have to complete the linksyssmartwifi setup
again, because reset will delete all the data from the Velop WiFi.
End Conclusion
Here, you have gathered information about how to connect the
Linksys Velop router to your home modem. We have also provided configuration
methods to adjust the Velop settings, and troubleshooting tips to solve issues.