There are many reasons why your Deco
is not connecting to the internet, such as missing a step during the Deco M5 setup
and deco nodes not configuring properly with the main node. This post will help
you to resolve all these reasons and will make your Deco system the best mesh
system. Below you learn the troubleshooting tips of the Deco Mesh system:
Not connecting to Internet
If your mesh system worked properly
but suddenly stopped working and showed an error saying no internet connection.
Resolve this issue by following the below steps:
- Make sure your main node is connected to the modem
properly.
- First of all, check all the Ethernet cables and LAN
ports are in good condition. If there is any damage in the cables and
ports, fix it.
- Try power cycling on your Deco devices.
- If your devices are set on static IP, set them on the
dynamic IP.
- Move all electronic devices from the Deco system, which
creates interference to the signals of the network.
- Reset all your connected nodes and pair again into the
Deco app.
These steps help you to resolve all
your connectivity problems.
Setup Deco Nodes Properly
It is crucial that every Deco WiFi
node is set up and configured correctly for the optimum Deco WiFi experience.
Set up your Deco M5 devices using the instructions below.
- Place your main node near the modem, and connect it to
the modem with the help of an Ethernet cable.
- Connect the power adapter properly to the node and plug
it into the power socket.
After connecting your node to the
modem, now you must adjust all the settings of the main node via login to the
browser and Deco app.
Login Via Web Interface
- To login via URL, first you need to connect your
computer device to the deco network with Ethernet cable or using an SSID
and password.
- Open any web browser on the computer and type URL tplinkdeco.net
or IP address 192.168.1.1 into the address bar.
- Now, a login page will open. Enter the admin username
and password.
- Click on the login button, and the web interface dashboard will open. You can adjust settings and add new nodes on this dashboard.
Configure Via App
- Configure nodes via app is easy and the best way.
Connect your mobile with the DECO network with SSID.
- Install the Deco app from the Google Play Store for
Android and the App Store for iPhone.
- Simply open the app and create an account by entering
your email and phone number for OTP validation.
- A interface will open. Here, you can customize all
settings and add new nodes via app.
By following these steps, you can easily perform the Tp-Link Deco Web login and app login process.
Restart Deco Nodes
The reboot process will help you to
resolve some minor issues related to the mesh system. To reboot, simply turn
off and plug out your deco device. After a few seconds, plug in and turn on the
device
Reset to Factory Default Settings
The reset process is used to restore
the default factory settings of the Deco nodes. There are two methods to reset
the nodes: manually, and the
second is via app.
Reset Manually
- To reset manually, insert the paper clip into the
pinhole that is present behind the device.
- Press the paper clip for 5-10 seconds; it will take a
few minutes to reset.
- When the reset process is complete, you must need to
configure the Deco device again.
Reset Via App
- Simply open the Deco app and login to it.
- Select the node that you want to reset, and clicks on
the setting option.
- Here, tap on the remove or delete button to reset the
node.
Conclusion
In this article, you learned troubleshooting tips related to the Deco M5 mesh system. And also resolve the problem due to which your deco devices are not connecting to the internet.